You are here:

CZI Tethered Lighting System CZ100

The CZ100 Tethered Emergency Lighting Drone is a professional aerial lighting system designed for night rescue, disaster response, emergency construction, incident command, and public safety operations. Powered through a ground-based tether, it delivers stable, long-duration aerial illumination without depending on conventional battery endurance alone. Official CZI materials list an 800W LED lighting system, 112,000 lumens of total luminous flux, a working altitude of 50 meters, and a maximum illuminated area of at least 13,000 square meters.

A New Partner, Ready for the Challenge

CZI CZ100 integrates drone and lighting technologies to provide a highly efficient, ultra-long-endurance emergency lighting solution for critical missions such as disaster relief and emergency construction in extreme environments.

Instant Illumination – Bright as Day

  • Luminous Flux 112000lm
  • Maximum Illumination Area ≥13000m²
  • Working Altitude 50m | Central Illuminance ≥17lx

Deployment and takeoff can be completed within 2 minutes, with all operations controlled solely from the ground end — no remote controller is required. The airside unit features a downward-facing camera for real-time monitoring

CZI CZ100 is equipped with an 800W LED light, providing bright illumination with a central illuminance of over 47 lux across an area exceeding 8,000 m² at the optimal operating altitude of 30 meters.

All functions of the CZ100 are managed via the ground control panel and touchscreen interface. Its tool-based design allows rapid mastery without the need for professional drone pilots, ensuring efficient support for every mission.

Tethered for Endurance, Illuminating Day and Night

The CZ100 supports a wide voltage input range, enabling direct connection to various national power grids, as well as outdoor energy storage systems, generators, and new energy vehicles.

The groundside unit is equipped with grounding stakes, effectively addressing issues of poor grounding and induced stray currents near high-voltage power towers.

Rock-Solid Stability for Secure Operations

The CZ100 is equipped with a dual-mode power supply system. In case of main external power failure, it instantly switches to an internal backup power source, ensuring safe landing of the drone end.

Anti-Interference Barrier, Guarding the Light

To handle the complex electromagnetic environment on site, the CZ100 adopts a dual-architecture system. The tether cable serves as the main control link, complemented by the “Smart Stabilization” visual positioning system.

Using powerline carrier technology, video and control data are transmitted via wired connection, immune to radio interference. The airside unit’s video feed is relayed in real time via HDMI to support on-site command and coordination.

Parameter Value
Model CZ100
Airborne Unit Weight ≤2.6 kg
Airborne Unit Deployment Dimensions 384 × 381 × 169 mm
Airborne Unit Folding Dimensions 381 × 237 × 200 mm
Symmetrical Motor Shaft Distance 480 mm
Maximum Flight Altitude 4000 m
Wind Resistance Level Level 7
Hovering Accuracy (Calm or Light Wind) Horizontal: ±1.5 m / Vertical: ±0.5 m (GNSS mode)
Maximum Ascent Speed 1.5 m/s
Maximum Descent Speed 1 m/s
Propeller Size 12 inches
GNSS GPS + BDS + Galileo
GNSS Frequency Band B1C, B2a, E1B/C, E5a, L1C/A, L5
Software BDS Only Support
Hardware BDS Only Support
Matrix Light Power 800 W
Total Luminous Flux 112000 lm
Lighting FOV 120°
CMOS Size 1/2.8″
Video Resolution 1920 × 1080
Ground Station Weight ≤12 kg
Ground Station Dimensions 337 × 224 × 385 mm
Ground Station Input Voltage 90–264 VAC
Ground Unit Battery Capacity 2300 mAh
Screen Size 5.5 inches
Screen Resolution 1920 × 1080
Screen Brightness 1000 nits
Ground Station Output Interface HDMI, Network Ports
IP Rating IP44
Operating Temperature -20°C ~ +50°C
Storage Temperature -40°C ~ +70°C

Contact us

Get a quote

You can fill out the contact form below and one of our representatives will contact you shortly.

    * this field is required